Managing Fire Hazards on Site
Construction sites, especially those in a transitional phase, introduce distinct fire hazards due to frequent layout changes, mobile equipment, and divided workforces. A sound alerting system is crucial for notifying workers without delay. The Howler range, including the radio-based GOLink system, HO units, and site alert models, provides a scalable safety setup to match various site demands.
A Look at HO Alarms
HO alarms are self-powered, battery-operated units used where hard-wired installations are impractical. Ideal for moveable cabins or outbuildings, they function autonomously.
- High sound output: Around 102 dB at a metre’s distance.
- Visual signal option: Some models include integrated lights for visibility.
- Weatherproof: Many are suited for external mounting or partially exposed areas.
These alarms offer supplementary coverage where the core alert network may not reach.
The Site-Wide Alert Range
Suitable for mid-sized projects, the Site Alert system can work as standalone or in linked setups of up to 20 units using a simple two-core cable. When set off, all devices in the network respond simultaneously.
- Approx. 100 dB sound level at 1 metre
- Built-in flashing beacon for loud or noisy settings
- Ideal where cabling is straightforward
Going Wireless: Site Alert RF
Where cabling is limited, Site Alert RF links up to 30 units over wireless. It has an open-area range of around 1 km and supports multiple frequencies for interference avoidance.
Combining wireless and cabled systems is commonly the best strategy website for sites with varying structures.
Integrating the GOLink System
The GOLink system serves as a coordinating hub for large, multi-zone installations, using wireless signals to link alarms.
GOLink Interface Connections
Through the Interface Unit, it’s possible to link turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can connect across a site-wide network.
Dual-Function Features
Certain models (e.g. H05 GOLink) include a first aid button alongside the fire alert. The first aid signal quietly sends a location-specific assistance request, allowing medical needs to be flagged without general evacuation.
How to Deploy Effectively
- Zone assessment: Identify where alarms need to be heard or seen, dividing the site into manageable sectors.
- Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or pop-up areas.
- Set a maintenance routine: Schedule regular testing and check battery levels.
- Training & signage: Ensure instructions are posted and team members know how to respond to alerts.
FAQs
- Wired capacity?
- Up to 20 Site Alert units can be connected using 2-core cable.
- How far does the wireless version reach?
- Approx. 1 km in open-air conditions, though physical obstructions can reduce range.
- HO panel required?
- No, HO models are standalone and do not require central control.
- Can GOLink interface with other site systems?
- Yes, external systems can be connected via the GOLink Interface Unit.
- Purpose of switch protection?
- It reduces false alarms by sounding a warning if tampered with before activation.
- Hybrid setup compatibility?
- Yes, the GOLink system allows wired and wireless units to operate on the same network.
- Will first aid alerts trigger full alarms?
- No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.
Final Notes
Whether your project involves website one zone or several, Howler alarms—HO, GOLink, and Site Alert—deliver protection that adapt to varying conditions. For product information, planning tools or live demos, visit the Howler section on FireSense.